BANDELIN

SONOREX TECHNIK Ultrasonic baths

SONOREX TECHNIK RM 16.2 to RM 75.2 (13 – 62 litres)
NEW – with inclined tank bottom!

One-piece industrial baths with inclined tank bottom.

Equipment
• Welded cleaning tank
in 2 mm stainless steel AISI 316L.
• Inclined tank bottom
for better cleaning results from optimum sound propagation. Facilitates emptying of the tank, and accumulations of soiling and residual liquid on the tank bottom are largely avoided.
• Overflow gutter
together with an oil separator is able to drain off floating contamination, oils and greases from the bath surface.
• Filling level mark
clearly stamped on the side as working filling level for cleaning liquid. Facilitates dosage.
• Welded drain
with three-way ball valve for emptying or refilling the tank and for connecting a filteration.
• Additional drain for connecting an oil separator or emptying the overflow gutter.
• Heating
On/off with control indicator, thermostatically adjustable from 30–80 °C.
• Drip-proof housing
in stainless steel AISI 304.
• Ultrasound
On/off with control indicator, timer 1–15 min or continuous operation.
• Ultrasound generator (integral)

Frequency 40 kHz.

Type (selection)	Internal tank dimensions l × w × d [mm]	Operating volume [l]	External dimensions l × w × h [mm]	Ultrasonic peak output* [W]	Ultrasonic nominal output [W]	Heating power [W]	Current consumption [A]
RM 16.2 UH	325 × 275 × 200/210⁺	13	365 × 340 × 390	1200	300	800	4.8
RM 40.2 UH	475 × 300 × 300/315⁺	31	540 × 340 × 495	2000	500	1250	7.7
RM 75.2 UH	575 × 500 × 300/315⁺	62	640 × 540 × 520	4000	1000	1950	12.9
+inclined tank bottom; *corresponds to 4 times ultrasonic nominal power; Mains supply 230 V~ (±10 %) 50/60 Hz

SONOREX TECHNIK RM 110 to RM 210 (110 – 210 Liter)
One-piece industrial baths for modular installations

Equipment

• as for RM 16.2 to RM 75.2,
but with a flat tank bottom

additionally

• Sprinkle tube
together with an oil separator create a flow on the bath surface which drains floating contamination, oils and greases from the bath surface into the overflow weir.
• Float switch
as dry run protection for heating and ultrasound.
• Height-adjustable feet for evening out uneven substrates.
• Ultrasound generator (integral)

Frequency either 40 or 25 kHz

Type (selection)	Internal tank dimensions l × w × d	Operating volume	External dimensions l × w × h	Ultrasonic peak output*	Ultrasonic nominal output	Heating power	Current consumption**
	[mm]	[l]	[mm]	[W]	[W]	[W]	[A]
RM 110 UH	600 × 450 × 450	110	780 × 550 × 800	4000	1000	4800	10.5
RM 180 UH	1000 × 500 × 400	160	1180 × 600 × 800	2 × 4000	2 × 1000	7200	14.8
RM 210 UH	750 × 650 × 500	210	930 × 750 × 800	2 × 4000	2 × 1000	7200	14.8
corresponds to 4 times ultrasonic nominal power; * per phase; Mains supply 400 V 3N~ (±10 %) 50/60 Hz

SONOREX TECHNIK RM 112 to RM 212 (115 – 230 litres)
One-piece industrial baths for modular installations

Equipment
as for RM 110 to RM 210

additionally
• Rounded tank corners
at the sides and bottom facilitate tank cleaning. Adhering soiling is avoided.

• Controls fitted above
facilitate the operation of switches for ultrasound and heating.

• Inclined tank bottom
for better cleaning results from optimum sound propagation. Facilitates emptying of the tank, and accumulations of soiling and residual liquid on the tank bottom are largely avoided.

Type (selection)	Internal tank dimensions l × w × d	Operating volume	External dimensions l × w × h	Ultrasonic peak output*	Ultrasonic nominal output	Heating power	Current consumption**
	[mm]	[l]	[mm]	[W]	[W]	[W]	[A]
RM 112 UH	600 × 450 × 450/470+	115	780 × 610 × 800	4000	1000	4800	10. Mai
RM 182 UH	1000 × 500 × 400/420+	170	1180 × 660 × 800	2 × 4000	2 × 1000	7200	14. Aug
RM 212 UH	750 × 650 × 500/520+	230	930 × 810 × 800	2 × 4000	2 × 1000	7200	14. Aug
+inclined tank bottom; corresponds to 4 times ultrasonic nominal power; * per phase Mains supply 400 V 3N~ (±10 %) 50/60 Hz

SONOREX TECHNIK ZM 112 to ZM 212 (115 – 230 litres))
Two-pieces industrial baths with separate generator

Equipment
as for RM 112 to RM 212, but external ultrasound generator

• Installation of generator in separate location fromwet area is possible.
• Stepless power regulation.
• Serial interface and remote control connection for external control of the generator.
• Implementation of several cleaning baths,
even with different frequencies, possible from a single generator.
• Model with bottom sonication (ZM … U / UH)
or with bottom and side sonication (ZM … UL / UHL), also available in TwinSonic design.

TwinSonic design as multi-frequency device
Multi-frequency devices in TwinSonic design operate with ultrasound systems of different frequencies on the bottom and side. The benefits are an even sonication and power distribution for a better cleaning result in a shorter time.

Type (selection)	Internal tank dimensions l × w × d	Operating volume	External dimensions l × w × h	Ultrasonic peak output*	Ultrasonic nominal output	Heating power	Current consumption**
	[mm]	[l]	[mm]	[W]	[W]	[W]	[A]
ZM 112 UH	600 × 450 × 450/470+	115	780 × 610 × 800	4000	1000	4800	4.3
ZM 112 UHL	600 × 450 × 450/470+	115	780 × 610 × 800	2 × 4000	2 × 1000	4800	8.6
ZM 182 UH	1000 × 500 × 400/420+	170	1180 × 660 × 800	2 × 4000	2 × 1000	7200	8.6
ZM 182 UHL	1000 × 500 × 400/420+	170	1180 × 660 × 800	2 × 6000	2 × 1500	7200	13
ZM 212 UH	750 × 650 × 500/520+	230	930 × 810 × 800	2 × 4000	2 × 1000	7200	8.6
ZM 212 UHL	750 × 650 × 500/520+	230	930 × 810 × 800	2 × 6000	2 × 1500	7200	13
+inclined tank bottom; corresponds to 4 times ultrasonic nominal power; * per phase Mains supply 400 V 3N~ (±10 %) 50/60 Hz; ultrasound generator: 230 V~ (± 10 %) 50/60 Hz

Peripheral units

Peripheral units program, which can be put together individually for the most diverse cleaning tasks.

Filtration FA 610/620

Peripheral units, e.G.:

– Filtrations
– Lifting device with oscillation
– Oil separator
– DI water treatment
– Trough dryer

Peripheral units

Peripheral units program, which can be put together individually for the most diverse cleaning tasks.

L 220 for cleaning of blinds and lamelles

Special devices for cleaning of e.G.:

– Oily machine parts on ships (W 65 and W 300)
– Gang saw blades (RL 70 UH)
– Pipes, profiles and long cutter blocks